Palestine Flat Anchorage

Model: DF-MBM Usage: Post Tensioning Concrete Construction Hardness: Wedge: 78-85HRA, Anchor Head: 25-36HRC Diameter: 12.7mm, 15.2mm,15.7mm Capacity: 1860Mpa Material: 40Cr Wedge: 2 Sections

Category:

PalestinePrestressed Anchor & Wedge

Product Description

The shape of the anchor head is flat. The layout of the prestressing tendons are usually horizontal and parallel. The BM stressing flat anchorage is applied for strands of 12.7mm, 15.2mm and 17.8mm.

It gets rid of the disadvantages of the over-concentrated prestress and large sizes in two directions of the group anchorages. The distribution of the prestress is more reasonable. The thickness of the anchor head can be thinner. It is usually applied in hogging moment such as the horizontal prestress of the floor of the buildings and bridges and simple support continuous girder.

Flat Anchorage

Specification	Flat Anchor Head			Flat Casting Plate			Duct		Spiral Reinforcement
Specification	A	B	C	D	E	F	G	H	J	N	K	ФІ	n
BM13-2	70	42	45	120	60	100	47	19	120	70	40	6	4
BM13-3	97	42	45	150	60	120	52	19	150	70	40	6	4
BM13-4	125	42	45	180	60	140	67	19	190	70	40	6	4
BM13-5	153	42	45	215	60	170	76	19	220	70	40	6	4
BM15-2	78	46	48	140	70	110	52	22	140	80	40	8	4
BM15-3	111	46	48	175	70	130	65	22	180	80	40	8	4
BM15-4	144	46	48	215	70	160	74	22	220	80	50	8	5
BM15-5	177	46	48	255	70	180	90	22	260	80	50	8	5